Radiators, boilers, and what your inspector will say about them

Most vintage Chicago buildings are heated by hot water or steam. It's quiet, even and long-lived, as long as you know what you're looking at.

By Dev Raman · Nov 19, 2026 · 5 min read

An empty room with light blue walls and hardwood floors

If you’re touring two-flats, greystones or courtyard buildings, you’ll see a lot of cast-iron radiators. Here’s a short guide to the heat in old Chicago buildings and the questions worth asking.

Hot water or steam?

  • Hot-water systems circulate water through the radiators and back to the boiler. They’re common in two-flats and houses. Look for a pressure gauge on the boiler and bleed valves on the radiators.
  • Steam systems boil water and send steam up through the pipes. They’re common in larger courtyard buildings. Steam radiators often have a small vent valve on the side that hisses when the heat comes on.

Either can work well for decades. The questions are about age and maintenance.

What to ask

  1. How old is each boiler? Many last a long time, and a high-efficiency replacement is a significant cost. Get the install date from the label or the seller’s records.
  2. When was it last serviced? Annual service is normal. Ask for the receipt.
  3. Is there asbestos insulation on the pipes? Common in old basements. It’s usually manageable, but it should be identified and handled properly.
  4. Separate boilers per unit? In a two-flat, separate systems mean each unit can pay for its own heat. One shared boiler usually means the owner pays.

What about cooling?

Radiator buildings have no ductwork, so cooling is window units, ductless mini-splits, or high-velocity systems with small flexible ducts. All are common in Gangway listings; the building file on each one says which.

The upside

Radiant heat is even and quiet, and in a Chicago January that matters. Many buyers who came in worried about “old heat” end up preferring it.

More from the journal